Double Entry Fiberglass Baptistry 13Ft 7Inch

Manufacturer: FSI

Product ID: FS-S2

Weight: 375.00 lbs

$2,691.00
~~$2,960.10~~

Choose Baptistry Color

Choose Gel Coat Type

Optional Plexiglas View Window

Double Entry Baptistry ROUTE Delivery (allow 1-8 weeks delivery after production) or Factory Pickup

Double Entry Baptistry HOTSHOT RUSH Delivery (allow 1-10 days after production)

13'7" wide x 4'2" front to back • 3'6" tall • 690 gallons • Dry weight 355 lbs • Filled weight about 6000 lbs • Available with or without a window

A very good value-level baptistry
Designed to minimize wasted space for economical water heating
Made to the same specs as our more expensive baptistries, money is saved by eliminating the front extension.
Available with or without window
11" stair treads with 7" risers feature a raised circle pattern for slip resistance and easy cleaning. Meets BOCA, SBCCA, UBC and 2000 Internation Building code.
Steps flow into the tank area for easier entry/exit and use as child step

Baptistry Construction Details

Baptistry Features

Baptistry Details

Fiberglass Church Baptistry -Please see picture for dimensions and detail
Baptistry Windows (if ordered) will be shipped "ready to install" and are caulked in place on-site.
Fiberglass baptistries have a lip around the edge which allows for drywall, tile or other finishing material to be placed. The lip is usually about one to three inches and may be trimmed on site for an exact fit.
Although it's best to wait on framing until you have the baptistry on-site, remember to allow for the framing when calculating dimensions.

Faucet and Drain Locations

Drain (not included) may be located in any corner of the baptistry. The drain is installed on site by your plumber, remember to leave a slight slope of about 1/16" or more towards the drain corner.
Do not install drains in center of baptistry.
Be sure to install an overflow drain above the waterline.
A regular faucet may be installed on the upper wall, or a wall mounted fill port may be installed.

Installation Details

Heat and Fill Options

See below for recommended circulation heaters and plumbing fixtures.
Heaters require 240v electrical service
5.5 kw heater is sufficient for most typical uses such as fill on Friday and use on Sunday. 11.5kw heater will heat faster and more efficiently but requires a larger panel breaker. See heaters for exact specs.
See our Baptistry Heating Chart for heating times.

Shipping and Delivery

Delivery is typically on one of our ChurchProducts.com trailers which are low to the ground and easy to unload.
Plan on having 4-5 able bodied people to unload.
We will email you when shipping and the driver will call with an ETA once he knows it.
We strive to deliver during the week but occasionally may deliver during the evenings or on weekends.
Some areas of the NW are outside our delivery area. Orders to this region may be shippped via LTL and are subject to shipping cost adjustment. Please inquire before ordering. If we do need to charge a higher rate we will contact you before processing your order.

Lead Times