24/7 Baptistry Water Heater 5.5kw -No Timer

24/7 Baptistry water heating solution for churches that keep baptism water heated 24/7 or that want a timer-free, reliable baptistry heater. (Can also be used by churches needing a quick baptistry heater for occasional use) • Use in new or existing baptistries. We recommend this unit for churches who will leave water in the baptistry continuously and need it ready to go at any time as you simply set the thermostat and the unit will cycle on and off to maintain the water temperature.) This also works well for churches who only baptize occasionally as you can fill your pool as you normally do and then simply turn the heater on, say Friday or Saturday, and the water should be ready to use by Sunday-heat times will vary depending on pool size so see our chart here) • The unit does not have a timer since you will use the thermostat to control the on/off cycle. • Available in 5.5kw for most baptistries (up to 1000 gallons) or with the booster heater (11kw) to service larger pools. • Baptistry circulation heater and pump unit can sit on ground or a platform up to 20ft from the baptistry. • For safety, this unit MUST be installed/used on a GFCI protected circuit. • Pre-wired, plug together connectors make installation easy. • On-off switch can be mounted remotely (works via air pressure) • Built in Thermostat cycles unit on and off to maintain temperature 24/7 • 1.5 inch fittings • ONE YEAR WARRANTY • Options Sold Separate: Auto Drain, Auto Fill, Remote Control Panel, UV sanitizer, Booster Heater, Water Filter