Must be Drained within 72 hours or Order with Premium Gel Coat
Unit must be framed in place for support
Stairs on this unit are completely inside the unit
Fiberglass Church Baptistry -Please see picture for dimensions and detail
Baptistry Windows (if ordered) will be shipped "ready to install" and are caulked in place on-site.
Fiberglass baptistries have a lip around the edge which allows for drywall, tile or other finishing material to be placed. The lip is usually about one to three inches and may be trimmed on site for an exact fit.
Although it's best to wait on framing until you have the baptistry on-site, remember to allow for the framing when calculating dimensions.
Faucet and Drain Locations
Drain (not included) may be located in any corner of the baptistry. The drain is installed on site by your plumber, remember to leave a slight slope of about 1/16" or more towards the drain corner.
Do not install drains in center of baptistry.
Be sure to install an overflow drain above the waterline.
A regular faucet may be installed on the upper wall, or a wall mounted fill port may be installed.
See below for recommended circulation heaters and plumbing fixtures.
Heaters require 240v electrical service
5.5 kw heater is sufficient for most typical uses such as fill on Friday and use on Sunday. 11.5kw heater will heat faster and more efficiently but requires a larger panel breaker. See heaters for exact specs.
Delivery is typically on one of our ChurchProducts.com trailers which are low to the ground and easy to unload.
Plan on having 4-5 able bodied people to unload.
We will email you when shipping and the driver will call with an ETA once he knows it.
We strive to deliver during the week but occasionally may deliver during the evenings or on weekends.
Some areas of the NW are outside our delivery area. Orders to this region may be shippped via LTL and are subject to shipping cost adjustment. Please inquire before ordering. If we do need to charge a higher rate we will contact you before processing your order.
July 2023-Due to industry backlog, please allow 6-12 weeks for delivery.