Dry Minister Baptistry Double Entry

Manufacturer: FUN

Product ID: FUN-8A

Weight: 375.00 lbs

$3,040.00
~~$3,344.00~~

Choose Baptistry Color

Choose Gel Coat Type

Dry Minister Baptistry RUSH Delivery (allow 1-10 days delivery after production)

Dry Minister Zone ROUTE Delivery (allow 1-8 weeks delivery after production) or Factory Pickup

Add to wish list E-mail to a friend

Overview

11'7" x 3'5" wide x 43" tall • Available in White, Blue or Bone • Includes plexiglass viewing window • Built-in seat • Rear cut out allows for minister to easily baptize candidate in seating position • 300 lbs dry weight. • 425 gallons • Optional Built In Heater • Allow 4-12 weeks for delivery.

Fiberglass Church Baptistry -Please see picture for dimensions and detail
Baptistry Windows (if ordered) will be shipped "ready to install" and are caulked in place on-site.
Fiberglass baptistries have a lip around the edge which allows for drywall, tile or other finishing material to be placed. The lip is usually about one to three inches and may be trimmed on site for an exact fit. Although it's best to wait on framing until you have the baptistry on-site, remember to allow for the framing when calculating dimenions.
Drain may be located in any corner of the baptistry. The drain is installed on site by your plumber, remember to leave a slight slope of about 1/16" or more towards the drain corner. Do not install drains in center of baptistry.
Be sure to install an overflow drain above the waterline.
A regular faucet may be installed on the upper wall, or a wall mounted fill port may be installed.