Round Baptistry Pool Single Entry - DISCONTINUED

Round Baptistry Pool Single Entry - DISCONTINUED

Manufacturer: FSI

Product ID: FS-R1

Weight: 375.00 lbs

Call for price

Add to wish list E-mail to a friend

Overview

The round baptismal pool makes a very unique and beautiful setting for baptisms. Our round models can be placed anywhere in the church, but are particularly suited for baptisms where witnesses gather around the pool to watch the baptism. The side walls can be finished off with natural stone, curtains or other materials to create a welcoming environment. • Single entry round baptistry available with steps right, left or center (unit configuration pictured with stones no longer available) • Available in 4 colors • 6'-10" wide x 10'4" long x 3'6" deep • Shipping weight 395 lbs. Filled weight about 6000 lbs. • 715 gallons • NOTE WINDOW IS NO LONGER AVAILABLE so images with window cutout are for reference only • Pictured Decorative stones not provided • See PHOTO for diagrams and configurations. • PLEASE CONTACT US FOR a SHIPPING QUOTE BEFORE ORDERING THIS MODEL. Listed Shipping should be accurate for most areas but due to the size of this model all shipping is subject to review based on delivery location • Please allow 8-10 weeks for delivery •

Baptistry Construction Details

Tensile Strength - 32,000 Pounds Per Square Inch
Molded One-Piece Construction
Non-Skid Steps
Plumbing Simplified with Standard Fixtures
Color Molded in Permanently
10 Year Warranty

Baptistry Features

Easily Installed or Relocated
Competitively Priced with Other Materials
10 Year Warranty
Must be Drained within 72 hours or Order with Premium Gel Coat
Unit must be framed in place for support
Stairs on this unit are completely inside the unit

Baptistry Details

Fiberglass Church Baptistry -Please see picture for dimensions and detail
Window Not Available on this model
Fiberglass baptistries have a lip around the edge which allows for drywall, tile or other finishing material to be placed. The lip is usually about one to three inches and may be trimmed on site for an exact fit.
Although it's best to wait on framing until you have the baptistry on-site, remember to allow for the framing when calculating dimensions.

Faucet and Drain Locations

Drain (not included) may be located in any corner of the baptistry. The drain is installed on site by your plumber, remember to leave a slight slope of about 1/16" or more towards the drain corner.
Do not install drains in center of baptistry.
Be sure to install an overflow drain above the waterline.
A regular faucet may be installed on the upper wall, or a wall mounted fill port may be installed.

Installation Details

Unit must be framed in place. See our Baptistry Installation page.

Heat and Fill Options

See below for recommended circulation heaters and plumbing fixtures.
Heaters require 240v electrical service
5.5 kw heater is sufficient for most typical uses such as fill on Friday and use on Sunday. 11.5kw heater will heat faster and more efficiently but requires a larger panel breaker. See heaters for exact specs.
See our Baptistry Heating Chart for heating times.

Shipping and Delivery

Delivery is typically on one of our ChurchProducts.com trailers which are low to the ground and easy to unload.
Plan on having 4-5 able bodied people to unload.
We will email you when shipping and the driver will call with an ETA once he knows it.
We strive to deliver during the week but occasionally may deliver during the evenings or on weekends.
Some areas of the NW are outside our delivery area. Orders to this region may be shippped via LTL and are subject to shipping cost adjustment. Please inquire before ordering. If we do need to charge a higher rate we will contact you before processing your order.

Lead Times