Affordable Church Steeple-in-a-Box 13ft an easy install steeple for small churches

UPS dimensions for the Steeple in a Box
Box 1…….73 x 15 x 15…..73 lbs…spire
Box 2…….24 x 24 x30-----31 lbs…base


Wind Loading: Different areas of the country have different wind loading requirements. Coastal areas usually have requirements that steeples meet 155mph+ wind loading requirements. It is the churches responsibility to determine the local requirements. Our standard steeples meet 120mph wind loading so if you require 155+ please email us before ordering for a quote to make your steeple meet 155+ requirements (this usually involves engineering reports and additional bracking). Our STEEPLE IN A BOX steeples are designed to meet 90mph wind loading and are not suitable for coastal areas.



Made to last of durable materials, you get a fiberglass base, fiberglass spire and aluminum cross which easily assemble together. You cut the roof pitch on site using a simple skill saw.

---

The steeple is designed to withstand wind loads up to 90MPH, or most category 1 Hurricane  winds.
Easy Installation-You supply the roof bracing (2x6's are usually perfect), and drill 4 small holes in the roof. Included threaded rods are then attached to the steeple and then inserted down through the roof to your bracing and bolted off.

---

NOTE: Requires access underneath the roof (attic or crawlspace) to locate bracing and bolt/tighten rods down.








Basic Steeple Installation Guidelines
1. Customer to supply and install roof brace (generally 2x6's located in attic between joists)
2. Cut roof pitch in base using a jig saw or similar
3. Bolt rods to base
4. Drill 4 holes in roof
5. Attach mounting hardware to roof brace and steeple base and tighten down





Limited Warranty of Steeple in A Box Series Steeples (Normal Steeples have a different warranty)

This is to certify that the fiberglass steeple-in-a box shall be guaranteed against structural defects
through normal usage for a period of two years when installed according to manufacturer's
recommendations. The gelcoated finish is warranted against defects for a period of 1 year.
If structural failure should occur, the manufacturer has the option of making the repair by qualified
personnel, or furnishing a replacement unit of the same design. Liability shall be limited to the
original purchase price only, and shall not include cost of removal, shipping, reinstallation or any
other cost not specifically stated herein.
Consumer / owner is required to return defective unit, freight prepaid to factory in Henderson, Texas, unless specific arrangements are made in writing and authorized by factory.
This warranty does not cover damage or failure caused by acts of God, misuse, abuse, accidents,
negligence, fire, lightning, or improper installation.
ChurchProducts.com nor Manufacturer. SHALL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES. INCIDENTAL DAMAGES, INCLUDING BUT NOT LIMITED TO, ANY DAMAGES FOR LOSS OF
USE OF UNIT OR INJURY TO PERSON OR PROPERTY AND ANY CLAIMS THEREFOR ARE HEREBY
SPECIFICALLY DISCLAIMED AND EXCLUDED. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTIAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
Proof of purchase may be required with any claim. The guarantee shall begin 30 days after
shipment of the SIB.