Celtic Aluminum Roof Cross Deluxe

ROOF MOUNT CELTIC ALUMINUM CROSS • Traditional square edge cross with Celtic ring • 6ft overall height • Extra wide 4" x 4" aluminum tubing • Ring is 4x4 tubing welded in line with the vertical and horizontal bars to give a fuller, dimensional look than the regular celtic roof cross. • 3ft 5 in.  overall width with 28 in. outside diameter celtic circle • Free standing, wall mount or supplied with roof mounting bracket • Painted using Sheffield #745 Super Bright Copper Exterior Enamel from Sherwin Williams. (other SW exterior enamel colors on request) • Mounts to a flat surface. Other base styles available for mounting to sloped roofs. This cross features a 8.5" x 9" base plate of 1/4" thick aluminum. It has a moveable pyramid shaped collar which hides the base plate and can be raised and lowered to facilitate installation. 16 in. Movable pyramid shaped collar made with 1/8in. thick aluminum material, 16x16 in.at bottom 14x14 at top 6in. height • Lightning protection: grounding lug attached INSIDE the vertical 4x4 tubing near bottom of cross so customer can attach cable from underneath side (no copper arial on aluminum cross as the cross will act as the arial) • Leave 1/16 to 1/8 in. space between collar opening and cross vertical. Customer to seal with acrylic during install •   • Free Shipping to a Church address (residential addresses not included) in the Lower 48 states. • Western states, South Florida (Below I-4), New England (above MD) Delivery Surcharge may apply.  • Construction sites or Limited Access delivery addresses Surcharge may apply. Please contact us before ordering to confirm shipping charges. • SEE BELOW FOR IMPORTANT NOTE ON CROSSES The church is responsible for verifying the suitability of a roof cross for their particular building, before placing the order. Orders may not be able to be cancelled once started. Crosses are not returnable. See additional information at bottom of this product page.