Celtic Aluminum Cross Traditional square edge ring 2 inch

NOTE ON ROOF CROSSES: If you are installing any size cross on your ROOF, please verify with your local building code officials whether permits are required and if engineered reports or drawings are required, prior to ordering. In many locations, crosses up to 6ft can usually be installed without an engineered report (drawings). Crosses 8ft and over usually require an engineer's report to verify that the cross will be able to withstand local wind loading conditions. You may have your own engineer prepare a report or we have engineer's whom we contract with that can prepare the report for a charge. You also need to separately verify (via a local engineer) that your roof is capable of supporting the wind load forces on the cross. Larger crosses may require custom mounting systems instead of standard roof brackets, which are designed more for smaller crosses. The engineer's report is a verification that our cross will not crumple under your location's wind loading and is not a guarantee that our cross is suitable to mount to your roof. We assume no liability for roof crosses other than that our cross will be made according to the engineer's report and will hold up to forces imposed under the wind load limits indicated. We do not guarantee that the cross will not blow off the roof-that is your responsibility to verify (via the report of a local engineer who has examined your roof structure.) The church is responsible for verifying the suitability of a roof cross for their particular building, before placing the order. Orders may not be able to be cancelled once started. Roof crosses are not returnable.