Baptistry Immersion Heater 120V with GFCI protected 16ft Cord and Float

• Simply plug the cord into the 120V volt outlet and set the thermostat to the desired temperature.
• Must be used in a minimum of 24" of water.
• Water level safety switch prevents dry heating
• High limit cutout at 118

• No Cutting or modification to existing baptistry
• Completely automatic and portable using the 60" power cord (included).
• 120v not recommended for pools over 150 gallons. It will not heat them very well at all.
• Due to heat loss into the air, you should allow 24-36 hours to heat 100 gallons with the 120V heater.

• Shipping Dimensions 46" x 19" x 3" Shipping weight 8.5 lbs
• Cold riser extends to the top of container where control housing is located.
• Stainless Steel Mounting brackets included
• High limit cutout protects from overheating
• Incoloy element

Warranty and Troubleshooting

One Year Manufacturer's limited warranty.
Follow troubleshooting steps in manual. If heater does not work, return it to manufacturer for inspection. Do not return it to Southeast Church Supply.