Baptistry Wall Spout CURRENTLY UNAVAILABLE Extra Heavy Duty Fitting

CURRENTLY UNAVAILABLE • Extra Heavy Duty Wall Fitting • Chromium Plated Brass (Silver in appearance) • 3/4" threaded female inlet (see additional picture) • Flush mounts to inside wall of baptistry and is used to fill the baptistry pool. • We suggest placing it high enough up where you will hear the water running into the pool while the baptistry is filling, but not so high as to splash water outside the pool. • The threaded tailpiece is just under 1-7/8" diameter so it will fit through a 1-7/8" side wall hole. If you are drilling a new hole, make it 1-7/8" diameter. For existing holes, this will fit in holes from 1-7/8" to about 2-1/8", maybe up to 2-3/8" if the hole is above the water line (depending on wall thickness and hole condition) • Flange OD is 2-5/8"