Horizontal Changing Station Stainless Steel Recess

FDA approved blow molded high-density polyethylene clad in 304 brushed stainless steel or polished brass. Reinforced full-length steel-on-steel hinge mechanism, with 11-gauge steel mounting plates and mounting hardware included. Contoured changing surface area is 442 sq in (2873 sq mm) and comes complete with nylon safety straps and bag hooks. OPERATION: Concealed pneumatic cylinder and hinge structure provides controlled, slow opening and closing of bed. High-density polyethylene is easy to clean and resists odors and bacterial ADA Compliance (when properly installed) 4.4.1 Max. Protruding Objects 4.2.5 Forward Reach 4.2.6 Parallel Approach 4.27.4 Operation The illustrations and descriptions herein are applicable to production as of the date of this technical data sheet. The manufacturer reserves the right to make changes and improvements in designs and dimensions without notice. KB110 SSRE Revised 8/2004 ? 2004 Koala Kare Products, A Division of Bobrick Printed in USA Page 2 of 3 growth. Complies with ASTM static load performance requirements when properly installed. Rated to support a static load of 300 pounds (136 kilos); tested to 400 pounds (182 kilos). Builtin liner dispenser holds approximately 25 KB150-99 sanitary liners. Warning: To insure that the unit supports the intended loads, baby changing stations must be properly installed according to the manufacturers instructions